3 IN 1 PLASMA, STICK & TIG

Other products in this category:

3 IN 1 PLASMA, STICK & TIG

3 IN 1 PLASMA, STICK & TIG
DC TIG, WITH 160AMP STICK WELDING AND LARGE 50AMP PLASMA CUTTING CAPABILITIES

200AMP Dc Tig & Stick Welding With Inbuilt 50Amp Plasma Cutter. This Unit Is Designed For Full Commercial Use. This Unit Has Mofset Control Cards & High Frequency Starting, Unlike Other 3 in 1 Units With Cheaper IGBT Control Cards. This Unit also Has An Inbuilt Pressure Guage

This new 2010 model comes with amp meter & air pressure guage

Comparing this welder to others being sold their is no comparison. This Three In 1 Tig, Plasma & Stick unit is the top of the line, full featured unit. If you check the features of this 3 in 1 unit compared to others being sold you will find that they do not come up to the standards of this welder.

This welding & cutting equipment is manafactured with advanced inverter technology with Mofset control cards & PWM technology. The ProWeld cut series plasma cutter/Stick/Tig has a revolutionary new approach to inverter welding technology, offering a larger duty cycle, which results in a better performance compared to other brands.

2010 MODEL HAS MOFFSET CONTROL CARD

The torch uses standard Plasma torch consumables available at any welding store. Included on the torch is a Teflon shield cup seat which should outlast the torch. 16 foot long torch cord is protected by a heat resistant sleeve and comes with many extra consumables as pictured.

Main technical parameters plasma cutter-

COMES WITH THE FOLLOWING ITEMS PICTURED BELOW

- Power voltage: AC 240V(5%)
- Power factor: 0.93
- No-load loss: 40W
- Housing protection grade: IP21
- Insulation grade: B
- Efficiency: 85%
  
  Power frequency: 50/Hz
  
  Weight: 15kg
  
  measurement (cm) 43*20*36
  
  Rated input current (A): 12amps (CUT)
  
  Rated output current: 120V (CUT)
  
  Max thickness: 12mm (CUT)
  
  Output current: 5-50A (CUT)
  
  Rated output current(A):50(CUT) Air supply required for plasma cutter - 3.6 CFM @ 70 to 90 PSI
  
  DC Tig Rated Output Current- 200amps
  
  DC Stick/MMA/Arc Rated Output Current-160amps 3.2mm Rod

There are currently no product reviews.

This product was added to our catalog on .

Advanced Search | Search by Size

CATEGORIES

3 IN 1 PLASMA, STICK & TIG